1997 mitsubishi eclipse alarm/rs

Home / the12volt's Install Bay / Car Security and Convenience / 1997 mitsubishi eclipse alarm/rs (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: July 27, 2007 at 10:06 PM / IP Logged

I am installing a Scytek 5000RS Alarm/RS on this vehicle and I have finished the wiring. It is not remote starting....I have double checked all wiring and have tested every wire that I have hooked up....I even tested the alarm/rs Brain on another vehicle that I have installed it on and the brain is fine. No crank...and it is an automatic. PLease HELP....maybe anothe starter wire?? I checked all the wires at the cylinder and i havent tested another starter wire so....I am totally stumped on this one. I dont know what to do.....HELP!!!!! Thanx.....

Search for other posts by shadowinfector

peterubers

Silver - Posts: 706

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 29, 2006

Location: United States

Posted: July 28, 2007 at 7:38 PM / IP Logged

sooooooooo.....

2) Do the dash lights come on? (i.e. does ignition come acc then ignition come on and THEN it fails?)

12 VOLT CONSTANT	WHITE (+)	IGNITION SWITCH HARNESS
STARTER	BLACK/ RED (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	BLACK/ WHITE (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	BLUE/BLACK (+)	IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 2	N/A

only one starter wire and one ignition wire.

Where's your tach source?

Have you tach learned/sensed the brain yet?

Does the car chirp/honk to indicate successful transmission of RF from keyfob to alarm brain/antenna?

The search function is your friend.

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: July 28, 2007 at 11:17 PM / IP Logged

lights come on then fail...then trys again and fails....and no successful indication for started vehicle...i think it is the tach wire...because i didnt hook it up because my system is setup for tachless and i have never had a problem with it on any other car i have installed it on...maybe this one is different...is there any other way to catch the tach wire besides the harness behind the cluster??? it is hard to get the wire and tap into it....any help thanx alot

creed2k

Copper - Posts: 99

Joined: March 31, 2007

Location: United States

Posted: July 29, 2007 at 1:18 AM / IP Logged

Try using an injector

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: July 31, 2007 at 10:26 PM / IP Logged

where are the injector wires located and what color?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 01, 2007 at 12:28 PM / IP Logged

Black plastic box on top of or level with engine cover runs parallel to it. 2 wires to each of 4 injector ports, one wire is the same in each case, DONT use this one , use one of the other 4 colours!

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: August 12, 2007 at 5:39 PM / IP Logged

i hooked up the tach wire and learned tach...double checked all wiring and tested all wires hooked up..... still no crank.....is there a second starter wire im missing or ignition wire?>??? i switched the brains from a working vehicle and still no crank at all....please help.......thanx

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 12, 2007 at 5:58 PM / IP Logged

This one is bugging me! I have a 99 Galant, it has a second ignition but you can start car without this. Read the install guide and check the trouble shooting section. Could you have gone to the second ign, A/c heater windows etc but not the primary? Everyone in USA says this is BLACK/ red but on my Galant it's RED / black.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 12, 2007 at 6:00 PM / IP Logged

Sorry I meant starter colour. 1997 mitsubishi eclipse alarm/rs -- posted image.

awdeclipse

Copper - Posts: 285

Joined: August 05, 2007

Location: Michigan, United States

Posted: August 12, 2007 at 9:13 PM / IP Logged

Double check your wiring to this spec.

http://www.vfaq.com/mods/wiring-gen2wir.html

You should be able to find plenty vehicle specific questions there for the DSMs.

Also, did you try bumping the starter manually with your RS harness?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.