the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

can-sl, disarm before remote start?


Post ReplyPost New Topic
< Prev Topic Next Topic >
peterubers 
Silver - Posts: 706
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 29, 2006
Location: United States
Posted: August 06, 2007 at 4:25 PM / IP Logged  

I notice there are no inputs for DISARM on the CAN-SL wiring, so my question is does this module send a disarm signal via the databus factory wire prior to remote starting (b/c I do notice there is an input for ground-while-running on the CAN-SL).

Thanks

The search function is your friend.
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: August 06, 2007 at 5:57 PM / IP Logged  
the CAN-SL disarms the factory alarm with the ground while running input and or unlock... this is basically the same way the other companies like Trilogix have it.
peterubers 
Silver - Posts: 706
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 29, 2006
Location: United States
Posted: August 06, 2007 at 6:29 PM / IP Logged  
So, just so i understand 100%, with remote start -- will it unlock -- r/s -- re-lock?  Or will it disarm (doors remain locked) -- r/s?
The search function is your friend.
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: August 07, 2007 at 12:22 AM / IP Logged  
As far as i know it will just disarm the factory alarm only(no unlock).  If you want a 100 percent correct answer you can go to http://bypasskits.fortinautoradio.com/en/ and create an account.  After creating an account you can post a question to the makers of the bypass and you will get an answer. 
peterubers 
Silver - Posts: 706
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 29, 2006
Location: United States
Posted: August 10, 2007 at 5:03 PM / IP Logged  

enice -- good call, this is my reply email from fortin:

Dear Customerj,

CAN-SL will disarm the TL's factory alarm before remote-starting (with ground-out), with no unlocking of the doors before starting.
Regards,
Jonathan

The search function is your friend.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer