peugeot 306 alarm to indicators

Hi, can anyone advise the best way to connect a generic alarm to the indicators of a 1995 Peugeot 306? I was thinking of wiring it to a single point somewhere behind the dash I guess, as opposed to running wires to all the indicators individually, but I don't know where to find the wiring for the indicators. If anyone knows, please post the location. Thanks

BSI box to the right of and adjacent to fuse box (assuming right hand drive). Black plug, test in situ, 2 of the leads will correspond to left and right indicators, alternatively pull hazard switch(dead easy) 1 lead will correspond to each side, also ign sense/stand off can be picked up there. Don't ask me for colours, Peugeot /Citroen have a wierd and wonderful wiring clour code, just test!

Thanks I'll try that tomorrow. Where would you reckon are the best places (in a peugeot 306) to place a microwave sensor? preferably in a not so conspicuous location which isn't so hard(or messy) to wire up

At this point I'll be billing you! If you can't do this take it to a pro. The answer is roof lning to rear of dome light or centre console but that's not such a great place, especially if you have tinted glass.