peugeot 206 and viper 5002 alarm

Hi! Can anyone tell me how to connect the DEI Viper 5002 alarm to a year 2003 (multiplex) petrol peugeot 206 direction indicators? From the 206 wiring diagram i understood that every indicator is controlled individually by the BSI. So do i have to wire the alarm output to every indicator (possibly with diodes?) or is there a common point to connect to? Ps. I allready tried to use the hazard warning lights switch like this but it doesn't work because it's a pulse switch. The first ground pulse makes the indicators blink and the second one makes them stop. Thanks!

You can either pick them up in loom to engine bay, make sure you have one of each side, or go to black plug on top of BSI, two of the wires coming out are your left and right indicators, don't ask for colours because you are entering nightmare territory! e.g. right hand indicator is either white or yellow, it's in passenger floor loom but there are EIGHT of that colour!  

howie, empty out your PM box. Its full and I can't reply back to your PM.