the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007, 2008 New Style Chevy Truck Notes


Post ReplyPost New Topic
< Prev Topic Next Topic >
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 27, 2007 at 10:05 PM / IP Logged  
Just wanted to post some information for the new body style Chevy trucks. I just installed a remote starter for this diesel truck and wanted to post some information on it for other's:
Constant Power wire - there are two constant power wires located on the side of the fuse box on the driver's side. These are 12 to 14 gauge wires on two separate connectors, very easy to see.
BCM Wires - many of the trigger wires can be found at the BCM located beside ( to the back of ) the fuse box. There are about 7 colored harnesses on this BCM. YOu can get the following wires from the BCM :
(-) Parking Lights - LIGHT BLUE Pin # 8 in the Clear/White plug
(-) Hood Pin - PINK/BLACK Pin # 17 in the BLACK plug
(+) Brake - LIGHT BLUE/WHITE Pin #6 in BROWN plug
(-) Parking Brake - LIGHT BLUE Pin #16 in BROWN plug
Tachometer - I used voltage sense mode ( tachless ). With the new Chevy trucks using this features works flawlessly and saves time with the diesels in trying to find a proper tach signal.
Wait to Start - With Compustar PRO systems you can set the delay from 1-99 seconds. I set the delay for 5 seconds.
Door Locks & OEM Security - Using the iDatalink ADS-TBSL-GM3 you can control the door lock and OEM arm/disarm features via databus.
PKG3+ Bypass - Using the iDatalink ADS-TBSL-GM3 you can bypass the PKG3+. Follow the instructions given for the new start bypass.
Ignition Wires - Grab all the ignition wires at the lower part of the steering column. It's easier to get them there than at the BCM. Removing the shroud of the steering column is easy, just pry the two halves and the tilt arm can be removed by pulling hard with your hands straight towards you when facing the tilt arm from the side.
Hope this helps other's member's and if you need other information about this vehicle I hope to be working on the gas versions more this winter. I'll post more information on the gas versions if there's anything differs.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer