'03 ford explorer keyless entry problem

Home / the12volt's Install Bay / Car Security and Convenience / '03 ford explorer keyless entry problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tuned97

Member - Posts: 3

Joined: July 10, 2004

Location: United States

Posted: September 28, 2007 at 6:30 PM / IP Logged

I am trying to install keyless entry on my explorer and can't get the door locks to work. I'm installing a DEI Valet 711T which has relays for door locks. Supposedly it has a reverse polarity locking system. I checked the pink / YELLOW wire (lock wire) in the kick panel and it shows 12V at rest and ground when I hit the lock button. I tried hooking it up how it showed in the DEI manual for reverse polarity locks and nothing. Can someone please help?

kola7126

Copper - Posts: 93

Joined: September 13, 2007

Location: Russian Federation

Posted: September 28, 2007 at 7:13 PM / IP Logged

POWER LOCK	PINK / YELLOW (TYPE B) See NOTE *2	IN DRIVERS KICK PANEL
POWER UNLOCK	PINK/LIGHT GREEN (TYPE B) See NOTE *2	IN DRIVERS KICK PANEL

On some vehicle with FACTORY ALARM or KEYLESS ENTRY, after the vehicle sets for a few minutes, if you cannot UNLOCK the door with the AFTERMARKET remote control it will be necessary to WAKE UP the GEM Module. See DIAGRAM, under DOOR UNLOCK, GEM WAKE UP DIAGRAM. IF the vehicle DOES NOT HAVE a FACTORY KEYLESS ENTRY or FACTORY ALARM it is a TYPE C Door Locking Syste

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'03 ford explorer keyless entry problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.