infinity qx56 trunk, starter issue

Home / the12volt's Install Bay / Car Security and Convenience / infinity qx56 trunk, starter issue (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

driep

Member - Posts: 1

Joined: October 20, 2007

Location: Alberta, Canada

Posted: October 20, 2007 at 8:38 PM / IP Logged

Hello all,

I am not a distributor, nor an installer, but rather an end user. I am hoping someone has seen this, and possibly has a solution, as my installer is out of ideas.

I just purchased, and had installed a Compustar CM330 starter on my Infiniti QX56, and they used the iDataLink ADS AL 32.

Everything works great except the hatch, and I am hoping someone can tell me if they have done a similar install, and if the following is possible.

The QX56 has both a glass hatch release, and a trunk (tailgate) release. Currently, when I press the trunk release button on my starter, it activates BOTH the window release, AND the tailgate opens as well, which is quite annoying. When I press it again, it closes the tailgate, but again, pops open the window hatch.

I am HOPING that this unit can simply just activate / open the tailgate alone (not the window hatch), and when pressed again, it will activate it again (which would close it).

Anyone seen this? Anyone have a solution that I can take back to my installer so we can make this work correctly?

Thanks all!

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 21, 2007 at 1:17 AM / IP Logged

Is the release and close option being triggered thru the i-data module? The only thing I have is from the Astrochart. A negative pulse on a blue/white at the switch that opperates the hatch door.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: October 21, 2007 at 7:08 AM / IP Logged

maybe it requires double pulse to open one and single for the other. I got negative YELLOW/BROWN (-) right of steering collumn from scytek wiring database. member to always probe your wires with a DMM

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

infinity qx56 trunk, starter issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.