honda crv 2005 factory keyless disable

Home / the12volt's Install Bay / Car Security and Convenience / honda crv 2005 factory keyless disable (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

a24036

Member - Posts: 5

Joined: October 23, 2007

Location: New York, United States

Posted: October 23, 2007 at 9:22 AM / IP Logged

Good day

Is there a way to unable keyless entry when engine is running? I install RS1100 by Bulldogsecurity. They give an option to use factory keyless remote to operate Remote Starter. Now I can start the car but since keyless does not work while engine is running I can not operate Remote Starter with factory keyless remote and I can not open the door either.:-)(well, I can use a key, but that would not be a good sport). Any solutions?

Thank you

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 23, 2007 at 10:09 AM / IP Logged

You need to use a system that doesn't use the OEM key FOB

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Twelvoltz

Platinum - Posts: 2,384

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: October 23, 2007 at 10:36 AM / IP Logged

If your RS1100 is the one listed on bulldogsecurity.com then it has the outputs you need to use the new system to lock and unlock the doors. The 05 CR-V uses type B (negative pulse) door locks. Lock is WHITE/ blue unlock is WHITE/ green in the driver's kick panel harness that goes into the door.

Installer, IT support, and FFL. I need less hobbies.

a24036

Member - Posts: 5

Joined: October 23, 2007

Location: New York, United States

Posted: October 23, 2007 at 1:48 PM / IP Logged

to Velocity Motors

I guesse I missed my status(rookie) :-)) OEM - original equipement manufacter? What it FOB?

to Twelvoltz:

If I understand correctly your advice will help to open and close the doors with bulldog's remote.(I'm not sure it's possible at all since remote has only 2 buttons:start and stop)

I'm trying to make factory keyless remote manage Remote Starter. according to bulldog I can programm the Remote Starter Unit to start if I press Lock button on factory keyless remote 3 times and stop when I press Lock button another 3 times. So start operation works but then car ignores factory keyless remote since engine is running.

a24036

Member - Posts: 5

Joined: October 23, 2007

Location: New York, United States

Posted: October 23, 2007 at 2:04 PM / IP Logged

And thank you for the help.

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: October 23, 2007 at 2:35 PM / IP Logged

I went to bulldog's site and they listed a RS1100xxxx. That unit had door lock outputs if yours does not then your only real option (as Velocity has stated) is to get a different unit that provides those outputs.

On your vehicle the keyless entry is a function of the BCM. By design it will not work when the vehicle is running. You can not use the factory remotes to lock/unlock once started. The only way to shut it off once running is to step on the brake, or press lock on the door panel three times. honda crv 2005 factory keyless disable -- posted image.

honda crv 2005 factory keyless disable -- posted image.

FOB

Installer, IT support, and FFL. I need less hobbies.

a24036

Member - Posts: 5

Joined: October 23, 2007

Location: New York, United States

Posted: October 23, 2007 at 3:29 PM / IP Logged

My bad. It's not RS1100. It is RS82P. RS1100 has door lock harmess but RS82P doesn't. Thank you for the help.

BTW, in case it can help anyone: Factory alarm plug on my car was not just hanging but was attached with sort of tape in up position with wire bundle. It took me a while to find me. And I used GREEN/ black wire wich becomes negative when you press lock button of factory remote. I used that wire to feed negative(blue) input on my Remote Starter which allowed to skip relay.

My Remote Starter has negative FASD output. I notice on forum that there is FASD input wire in door harness to shutdown alarm when you open door with the key. Do you think I can use this wire to shutdown alarm and feed driver's door unlock wire?

a24036

Member - Posts: 5

Joined: October 23, 2007

Location: New York, United States

Posted: October 23, 2007 at 3:49 PM / IP Logged

Another "fiture" of my instalation: when I was locking the car using Lock button of remote, Hoda use to flush parking light. If I press Lock button again it was flushing the lights and giving signal. Now it just quitely locking the car giving no confirmation. What do you think I broke?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

honda crv 2005 factory keyless disable

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.