the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bmw 530i 2004 e60 central locking


Post ReplyPost New Topic
< Prev Topic Next Topic >
sova 
Member - Posts: 2
Member spacespace
Joined: September 12, 2003
Location: Russian Federation
Posted: October 23, 2007 at 2:32 PM / IP Logged  
Good day.
need central locking wiring diagram for this car.
thanks
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: October 23, 2007 at 3:15 PM / IP Logged  
Audiovox lists:
     Power Unlock          BLACK/ WHITE          (+)          IN DRIVERS DOOR AT SWITCH          
     Power Lock              BLUE/RED                  (+)        IN DRIVERS DOOR AT SWITCH
They also list this note:
THESE WIRES DONOT FUNCTION WHILE THE CAR IS RUNNING. YOU MUST ALSO CONNECT TO THE YELLOW/RED WIRE AT THE COURTESY DOORLOCK SWITCH IN THE CENTER CONSOLE. A GROUND PULSE TO THIS WIRE WILL SIMULTANEOUSLY LOCK AND UNLOCK THE DOORS
Hope it helps.
Installer, IT support, and FFL. I need less hobbies.
sova 
Member - Posts: 2
Member spacespace
Joined: September 12, 2003
Location: Russian Federation
Posted: October 24, 2007 at 8:10 AM / IP Logged  
These wires for E39 .
E60 - seven wires in the driver’s door lock module connector.
Two wires – motor lock\unlock
One wire – door light switch
Brown – ground.
Black\yellow - ? 0V
Blue\red - ?    0V when rest , +9V when turning key to lock or unlock.
Yellow\? (don’t remember stripe) – 0V when rest, switching +10V when turning key to lock or unlock and 0V after few minutes.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: October 24, 2007 at 10:51 AM / IP Logged  
Sova, not the lock module, it's a plug on the switch.
kola7126 
Copper - Posts: 93
Copper spacespace
Joined: September 13, 2007
Location: Russian Federation
Posted: October 24, 2007 at 5:26 PM / IP Logged  
Adapter CAN is necessary for connection

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer