the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

honda civic 530t , clifford matrix 12.5x


Post ReplyPost New Topic
< Prev Topic Next Topic >
mechanix 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: October 26, 2007 at 1:29 PM / IP Logged  

Hello everyone,

I’m installing a 530T with a Clifford Matrix 12.5x into a ‘98 Honda Civic. I know, at least I think I know, which wires to splice for the up and down functions. However I am not sure what wires on the alarm I should connect the 530T wires to. I would like the windows to roll up when armed, and to roll down and vent with a press of the button. Thank you.

Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: October 27, 2007 at 2:57 PM / IP Logged  
Orange H1/12 Ground when armed to Orange H2/4 on your 530T. This will roll the windows up when armed.
There are a couple of wires that you could use to trigger the roll down but I would use the H2/4 Gray/Black channel 6 output. This output is active as long as you hold the button down. Press and release the button and the windows vent, hold the button the windows roll all the way down.
Installer, IT support, and FFL. I need less hobbies.
mechanix 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: October 28, 2007 at 4:15 PM / IP Logged  
Thank you very much for the info.  Do I need a relay connected to the channel 6 wire?  Thanks again.
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: October 29, 2007 at 9:07 AM / IP Logged  
There should be no need to add a relay as the inputs require a low current negative.
Installer, IT support, and FFL. I need less hobbies.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer