pink wire on compustar pro starter

Home / the12volt's Install Bay / Car Security and Convenience / pink wire on compustar pro starter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hankblas

Member - Posts: 4

Joined: October 26, 2007

Location: Ontario, Canada

Posted: November 05, 2007 at 10:47 AM / IP Logged

I have all the wires marked where they have to go except the Pink slave timer start wire. Do I need this wire for my car a 2003 Acura EL factory alarm and keyless entry. Thanks

Back to Top

hankblas

Member - Posts: 4

Joined: October 26, 2007

Location: Ontario, Canada

Posted: November 05, 2007 at 10:48 AM / IP Logged

i forgot to ask where it goes

Back to Top

usabuilt

Copper - Posts: 161

Joined: September 11, 2007

Location: United States

Posted: November 05, 2007 at 12:09 PM / IP Logged

Sounds like it goes to a timer which would send it a negative pulse to start the car at certain time intervals, (not sure though), but if that is its function it would not be required unless you have a timer.

Back to Top

hankblas

Member - Posts: 4

Joined: October 26, 2007

Location: Ontario, Canada

Posted: November 05, 2007 at 12:58 PM / IP Logged

I forgot to mention that on the compustar install manual it says the the pink wire "is most commonly used when adding a remote start to a factory keyless entry system. You can adjust the number of pulses with option 2-4"

Back to Top

usabuilt

Copper - Posts: 161

Joined: September 11, 2007

Location: United States

Posted: November 05, 2007 at 1:34 PM / IP Logged

then that wire would not be needed if you are using Compustar remotes,make sure you tape the wire, because a ground on that wire WILL cause the remote starter to activate.

Back to Top

usabuilt

Copper - Posts: 161

Joined: September 11, 2007

Location: United States

Posted: November 05, 2007 at 1:38 PM / IP Logged

forgot to mention if you are using your factory remotes to start your car you can tie this wire to the unlock wire in your car and set it for 2 or 3 or 4, which means if you press your unlock either twice or three times or 4 times it will also activate the remote start...be sure to use a relay on the unlock wire also.

Back to Top

usabuilt

Copper - Posts: 161

Joined: September 11, 2007

Location: United States

Posted: November 05, 2007 at 1:40 PM / IP Logged

I should have said tie it to your lock wire..sorry..I need more coffee.

Back to Top

hankblas

Member - Posts: 4

Joined: October 26, 2007

Location: Ontario, Canada

Posted: November 05, 2007 at 2:42 PM / IP Logged

Thanks for the help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pink wire on compustar pro starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.