alpine remote problem

Home / the12volt's Install Bay / Car Security and Convenience / alpine remote problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tsupra

Member - Posts: 4

Joined: February 22, 2003

Posted: February 22, 2003 at 11:45 AM / IP Logged

recently i've been having a problem with my alpine sec-8052 alarm system. the problem is neither remote will disarm the alarm. i've replaced the batteries in the remotes but still nothing. one odd thing, when i press and hold the tx/panic button the panic alarm goes off like it should. this alarm has worked great in my car for the past 3 years and i'd like to keep it. could the remotes need to be reprogramed for them to arm and disarm again? if so how do you do this?

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: February 22, 2003 at 5:58 PM / IP Logged

It sounds like your alarm system is on valet mode. Press and hold the ext button on the remote control from 3 seconds and it will take the alarm out of valet mode.

Good luck.

tsupra

Member - Posts: 4

Joined: February 22, 2003

Posted: February 22, 2003 at 6:12 PM / IP Logged

well, that didn't do it. any other ideas?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine remote problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.