2008 dodge ram 1500 security indicator

Home / the12volt's Install Bay / Car Security and Convenience / 2008 dodge ram 1500 security indicator (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jnmarshall

Member - Posts: 2

Joined: June 11, 2003

Location: United States

Posted: November 15, 2007 at 2:31 PM / IP Logged

I'm installing an alarm on a new '08 RAM 1500. The truck already has a working LED on the dashboard that lights up during the bulb check when it is started. According the manual, it's used for the factory alarm, which is not present on the truck. But since it works, I was hoping someone might know what wire might be used. In a service manual, it's probably referred to as VTSS or EVS.

Any help would be appriecated.

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: November 15, 2007 at 5:15 PM / IP Logged

2008 dodge ram 1500 security indicator -- posted image.

The red blinking light that you see in the dash serves a dual purpose, it is for tha factory alarm as well as for the tranponder key , you truck is equipped with an immobillzer when the key is turned the cars sees the key and the lights lights up for a few seconds. Just mount the light that comes with you alarm.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Back to Top

jnmarshall

Member - Posts: 2

Joined: June 11, 2003

Location: United States

Posted: November 15, 2007 at 9:46 PM / IP Logged

I was hoping someone would have more techincal info, like a wiring diagram. I wanted a cleaner install. According to the dealer techs, it's not connect to the sentry system. It's for the factory alarm (VTSS) only. The owners manual confirms this. It states with out the factory alarm, the light will still illuminate during the normal test cycle.

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: November 16, 2007 at 12:09 PM / IP Logged

2008 dodge ram 1500 security indicator -- posted image.

The light on the bottom right corner is for the transponder on the key. Besides you cant't use it it is contolled trough CAN bus there is no wire for it behind the cluster, But if you find it keep as posted. Ijust 3 of those cars last week and I use the indicater light to allow me to program new Keys.

P.S. Can any one else add to the subject (Installers only)

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: November 16, 2007 at 12:59 PM / IP Logged

It's controlled internally in the cluster, there is no wire that exits the cluster for it.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 dodge ram 1500 security indicator

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.