please help with remote starter!

Hi,

I recently baught a alarm, KeyLess Entry, and Remote Starter system LCD for my 1992 CAMARO RS.  There are 3 relays for the ignition wires, and 1 for the Kill relay. I have a picture to the wiring diagram in the link below:

http://members.aol.com/GUSHANAS/Diagram1.jpg

The 12 Pin harness which has the trunk release, keyless entry, siren, lights, etc. is hooked up and everything works fine!  BUT the 9 Pin harness which is the Remote Starter does not. If the button on the LCD Remote is pushed nothing happens not even a click out of any of the 4 relays.  I have it wired as follows:

YELLOW - Start kill relay output =kill relay yellow

 -BLUE On Kill Relay - ACC = Orange ACC. wire in ignition harness

 -GREEN 1 + 2 - between ignition wire and coil

ORANGE - Foot Brake Imput = Light blue on foot brake

BLUE - Doog Trig. Imput = White on door kick panel / door trigger

WHITE - ACC. = to BLACK Door Unlock

BLACK/ WHITE - Window Module Output = ??????? i donno where it goes?!?

PURPLE - Starter Sensing Imput = rapped around coil wire 8 times

YELLOW + BROWN + BLUE = connected to plug then plug to relays

YELLOW - Start = YELLOW

BROWN - ON1 (ignition Coil) = Pink

BROWN - ON2 = ORANGE ACC. WIRE

BLUE - ACC. = ORANGE

RED - +12V = to 1 of 2 constant red wires

pleaseeee help me out anyone!!!!!!! i am desprite and tryed everything possible!!!!!!

Thanks,

Brett