fortin chrdaa, 2005 jeep liberty

Home / the12volt's Install Bay / Car Security and Convenience / fortin chrdaa, 2005 jeep liberty (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

baypoint

Member - Posts: 7

Joined: December 03, 2007

Posted: December 09, 2007 at 4:25 PM / IP Logged

I am installing a Prestige APS997 remote start /security on a 2005 Jeep Liberty. Will a Fortin CHRDAA work on a 2005. I checked Fortins webpage it lists the CHRDAA-04, does anyone know the difference between the CHRDAA and the CHRDAA-04 ?

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: December 09, 2007 at 5:29 PM / IP Logged

From what i understand. chrdaa only works on older chrysler models up to 04. For 05 liberty you needs a separate pats for transponder which can be plugged directly into the chrdaa's 2 pin plug. They call it chrdaa 04 combo which is actually consists of a chrdaa and a pats 04.

baypoint

Member - Posts: 7

Joined: December 03, 2007

Posted: December 10, 2007 at 2:49 PM / IP Logged

Moonliter,

Thanks for the reply. It looked like Fortin had chrdaa(discountinued) and chrdaa-04. I wasn't sure if all I needed to add to the chrdaa was the pats 04.

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: December 10, 2007 at 3:35 PM / IP Logged

I believe so you can, but I definitely send out an email to Fortin for confirmation.

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: December 11, 2007 at 10:27 AM / IP Logged

Yup, if u already had a chrdaa, then all you need is a pats chrysler 04. obviously the chrdaa's transponder portion is not compatible with 05 liberty. The pats chrysler 04 will take care of the transponder bypass for 05 and the chrdaa will still do the alarm disarm/arm, doorlocks etc.

good luck

baypoint

Member - Posts: 7

Joined: December 03, 2007

Posted: December 12, 2007 at 8:11 PM / IP Logged

I called Fortin comfimed that CHRDAA will work just need pats 04.

Thanks again

saskpuller

Copper - Posts: 144

Joined: November 14, 2006

Location: Canada

Posted: December 12, 2007 at 10:47 PM / IP Logged

Just a note.... I put a CHRDAA into a 03 Liberty week back. Custoimer complained that headlights would go out when applying brake. Took out the CHRDAA and replaced with chdl4pk2 and problem went away. I got to thinking that if I diode isolated those two wires that come from the 3-wire harness, it may have worked. Just for you info......

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fortin chrdaa, 2005 jeep liberty

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.