Problem with SPAL shaved door kit

Home / the12volt's Install Bay / Miscellaneous - Off Topic / Problem with SPAL shaved door kit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dj_skillz

Member - Posts: 8

Joined: March 19, 2005

Location: Canada

Posted: April 22, 2005 at 8:49 AM / IP Logged

Hey guys, I'm having problems hooking up the aux channels on my SPAL shaved door kit. I've got a 4 door so I'm trying to hook up the back doors. I'm using a relay with a built in diode from 86 to 85.

I've got the aux channel from the SPAL going to 85.

86 and 87 are connected to a constant +12V with a 30 amp fuse.

and 30 is going to the solenoid.

I've tried all 5 aux channels and only one of them worked....for a day, then the fuse popped. Replaced the fuse and it still didn't work.

Is it possible that i fried all the aux channels.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 22, 2005 at 3:32 PM / IP Logged

Yup.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

dj_skillz

Member - Posts: 8

Joined: March 19, 2005

Location: Canada

Posted: April 22, 2005 at 6:12 PM / IP Logged

Well, I got a spare receiver because I bought 2 shaved door kits. I'm a bit hesitant on wiring up the second receiver because I don't want to fry the channels on that one . Any suggestions?

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 22, 2005 at 7:50 PM / IP Logged

Way to hard to tell what happened. The relay is wired correct. The fuse that blew, was it for the relay or for the module? The relay should isolate the sol from the module and shouldn't have been able to blow it up. Still doesn't explain why the module's other channels didn't work.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Problem with SPAL shaved door kit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.