2 step unlock feature relay

Hello, I am new here, hello all...  I installed a code alarm 610 in my 2004 chevrolet silverado. The truck didn't have power windows or power locks. So I installed power windows on it with no problems. Then I installed a code alarm 610 with auto start, and I planned to use the remote from that to work the power door lock actuators. Everything is working great but I read in my manual that I can add a relay to the two relays I already have hooked up so when I press unlock on my remote once it will unlock the drivers and two times will unlock the passenger door. I just need to know how to hook up the other relay for the 2 step unlock. Thank you for all your help. let me know if you need anymore info.

The above diagram, you will be using one side of the relay ignore the other, we'll go with the left side so you don't get confused, just as i have it labelled above in my first post!commit your way to jehovah and he will act in your behalf. psalms 37:5

I'll give it a try tomorrow, and I'll write back and let ya know. thank you

your awesome!! it worked and it was easy.. the only other problem I have is after I auto start my truck and I stop it with my remote the dash lights stay on until I hit the unlock button on the transmitter, then they go off. there is another wire on my alarm brain to shut the accesories off after the vehicle remote start is shut down, I just dont know what to hook it to. again thanks for all your help and also if you can help me with my other problem. thank you,

can anyone help me??

if noone knows the answer, please dleat this so I can post my question in a different forum topic. thank you

whoops.. I mean delete