mirror switch diagram

I have this schematic which I somewhat understand but I'm not certain how the relay/ AB switch would function. I can pretty much tell that Blue/Red Stripe is Hot and WHITE/ Black Stripe is Ground but the rest is beyond me. There are 8 wires coming from each mirror Any help would be greatly appreciated. There is an A/B switch in this switch. Hopefully I gave enough info. Thanks so much Dave Be part of the solution not part of the problem!!!

It looks like 3 wires from each mirror to me. It should be a normal polarity reversal for each motor depending on the direction. EG, for left & up, GND is connected to the motor common while the +12V goes to each motor thru the Left & Up switches respectively.    For right & down, +12V is switched to the motor common while GND goes to each motor thru the Right & Down switches respectively.

wascapsfan wrote: I have this schematic which I somewhat understand but I'm not certain how the relay/ AB switch would function. I can pretty much tell that Blue/Red Stripe is Hot and WHITE/ Black Stripe is Ground but the rest is beyond me. There are 8 wires coming from each mirror Any help would be greatly appreciated. There is an A/B switch in this switch. Hopefully I gave enough info. Thanks so much Dave

Be part of the solution not part of the problem!!!

The last shows the same polarity reversal to each motor but done with SPDT relays instead of a DPDT switch. But those motors also have position sensing variable resistors. The DDM compares that to its setting and adjusts them to match. What are you trying to do?