2000 ACURA Integra GSR sunroof relay

It would be best to use a window module to control your sunroof and you'd probably like the way it works much better than just using an output with a relay, but to control it with the relay you'd connect 85 to the gray wire, 86 and 87 to 12V+, 30 to the motor side of the open wire of the sunroof and 87a to the switch side of the open wire of the sunroof. The output from your alarm needs to be a latching output meaning it supplies current for as long as you hold the button. If it's only a momentary output, you'll need to use a window module unless you want to hit the button about 30 times for it to open all the way :D.~~wirewise~~