remote start

Home / the12volt's Install Bay / Relays / remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

90geostorm

Member - Posts: 3

Joined: February 22, 2004

Location: United States

Posted: February 22, 2004 at 2:08 AM / IP Logged

ok, i have installed previously a push button ignition, with a kill switch. then tonite i went out and got a remote switch box to run my fan, and the kill switch, the switch box can take a 150 amp load, so how would i switch my push button start over to remote on/off switching, thats if my starter system puts out lessx than 150 amp. wouldn't a relay have to be used in this regard then? and if so which relay would i use...i have a bunch of relays from my previous car which i could use, i have 4 pole relays and 6 pole relays (the 6 pole dont have wiring diagrams on the side of them) if so how would i wire up my push button to remote on/off switching???

Back to Top

90geostorm

Member - Posts: 3

Joined: February 22, 2004

Location: United States

Posted: February 22, 2004 at 2:16 AM / IP Logged

i forgot to mention ithe relays i am using are from a geo storm the 4 pole is part # 8943438450 mr5b237a1

and the 6 pole part # is 8-94147-095-0

wr5a602b1

both made by Jideco

Back to Top

90geostorm

Member - Posts: 3

Joined: February 22, 2004

Location: United States

Posted: February 23, 2004 at 7:20 AM / IP Logged

yay!!!!!!!!!!!!1 success got my remote start to work

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.