Flashing lights

Home / the12volt's Install Bay / Relays / Flashing lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tbirdsc

Member - Posts: 2

Joined: November 01, 2004

Location: Albania

Posted: November 01, 2004 at 4:40 PM / IP Logged

I hope someone can help im trying to make a single filament bulb (194) act as a dual filament bulb i need it to flash when the turn signals are on with the parking lights on or off is there any way this is possible or is there a DF bulb the same size as a 194

Thanks Brad

Back to Top

tbirdsc

Member - Posts: 2

Joined: November 01, 2004

Location: Albania

Posted: November 04, 2004 at 9:27 PM / IP Logged

thanks everyone for looking

i couldn't figure it out i guess if it could be done they wouldn't have the dual filament bulbs

i installed leds for the parking lights and will use the 194 for the turn signal looks great and prolly better

Thanks

Brad

Back to Top

Image6902

Member - Posts: 45

Joined: November 05, 2004

Location: United States

Posted: November 09, 2004 at 2:40 PM / IP Logged

sorry i was too late to help, but i wired my foglights (single filament) with three relays so that they would work as turn signals(ON>OFF>ON)and when you turn on the parking lights, the foglights come on, turn the turnsignal on(OFF>ON>OFF) works beautifully. if you want the wiring info, let me know...

I tell it like it is...

Back to Top

ff-mike

Copper - Posts: 199

Joined: November 15, 2004

Location: United States

Posted: November 15, 2004 at 10:42 AM / IP Logged

Wire the 194 lamp leads to the 2 hot wires for the park& turn lamp. Do not ground this lamp. The 194 will be XORd to the park/tail lamp.

Logic Table

park turn | 194

---------------------

off off | off

off on | on

on off | on

on on | off

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Flashing lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.