95 Lasabre door lock/unlock

You can start with the diagram below. Ask question if you are stuck on the install. You can place the relays anywhere you find room. Make it neat and tied it up so that it doesn't interfered with any moving parts underneath the dash.     Power Lock            lt. blue    +   either kick panel Power Unlock          white    +   either kick panel DIRECTWIRE™ WIRING INFORMATION - BUICK / LESABRE / 1995 / Security 12volts red    +   ignition harness Starter yellow    +   ignition harness Ignition pink    +   ignition harness Power Lock lt. blue    +   either kick panel Power Unlock white    +   either kick panel Lock Motor gray      drivers door harness Unlock Motor tan      drivers door harness Disarm Defeat tan      passenger door harness Parking Lights+ brown      low in drivers kick panel Parking Lights-           Hazards           Turn Signal(L)           Turn Signal(R)           Door Trigger dk. blue or white    -   drivers door harness Dome Supervision use door trigger        Trunk/Hatch Pin ORANGE / black    -   trunk light or switch Notes: Models with a trunk ajar indicator have a RED / black low in the drivers kick panel. Hood Pin           Trunk/Hatch Release BLACK/ white    +   low in drivers kick panel Power Sliding Door           Factory Alarm Arm           Factory Alarm Disarm lt. green    -   drivers door harness Disarm No Unlock           Tachometer PURPLE / white   AC   ignition coil Notes: You may also use white at the back of the instrument cluster. Horn Trigger black    -   steering column Memory Seat 1           Memory Seat 2           Memory Seat 3           Immobilizer Bypass Module: Required: Yes Type: VATS Part #: 652T resistor pack Notes: See DirectFax document 1049 for interface information.        This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information. Be careful whose advice you buy, but be patient with those who supply it.

Thanks for the helpfull and quick responce. I will give it a try.Oliver