the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

diode for relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
gudel 
Member - Posts: 10
Member spacespace
Joined: March 05, 2005
Location: United States
Posted: March 23, 2005 at 2:04 AM / IP Logged  
i've got some these bosch relays, is it necessary to put a diode between terminal 85-86? i wonder if these relays already have a diode protection inside it.
thepencil 
Gold - Posts: 1,526
Gold spacespace
Joined: December 16, 2002
Location: Canada
Posted: March 23, 2005 at 9:54 PM / IP Logged  
A discussion on the topic that you are asking.
If the relay has a diode you will be able to see it.
Be careful whose advice you buy, but be patient with those who supply it.diode for relay -- posted image.
gudel 
Member - Posts: 10
Member spacespace
Joined: March 05, 2005
Location: United States
Posted: March 24, 2005 at 3:42 AM / IP Logged  
does the bosch relays have built in diodes? i doubt they would stick it outside the housing. anybody knows? just curious.
Ween 
Platinum - Posts: 1,366
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: March 24, 2005 at 5:15 AM / IP Logged  

some bosch relays have the diode inside them, most don't.  they may have a supression resistor instead.  usually bosch molds/imprints the case with the components inside the relay.  look for the schematic diagram of a diode on them.  hope this helps.

mark


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer