what should i do,Fogs?

Home / the12volt's Install Bay / Relays / what should i do,Fogs? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

aaron19121

Member - Posts: 15

Joined: October 19, 2005

Posted: January 26, 2006 at 8:46 PM / IP Logged

i have fogs hooked up with a relay and they do cut off when i turn on my high beams. For about one year now i used a 10 and a 15 amp fused near the batt. the problem is after say like 4 months the fuse melts but never blows what can i do to keep this from happening.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 26, 2006 at 9:23 PM / IP Logged

First thing I would recommend would be to check your grounds and make sure that they are good. You should replace the fuse with whatever fuse it came with originally.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what should i do,Fogs?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.