how do create a 3-second pulse ?

Home / the12volt's Install Bay / Relays / how do create a 3-second pulse ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fishmonks

Member - Posts: 4

Joined: January 06, 2003

Location: United Kingdom

Posted: January 06, 2003 at 9:37 AM / IP Logged

If I press a momentary contact switch to send a signal, how do I turn that signal into one that lasts 3 seconds ?

fishmonks

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: January 06, 2003 at 11:44 AM / IP Logged

You should be albe to reprogram the alarm to provide you with this pulse. Go to www.relayapps.com for the right way to hook up your relays. Just keep clicking next until the vacum door lock circuit comes up. Good luck. Brian

fishmonks

Member - Posts: 4

Joined: January 06, 2003

Location: United Kingdom

Posted: January 06, 2003 at 3:21 PM / IP Logged

Hi Brian,

Many thanks for the link to relayapps.com - the diagram is perfect.

However, for my lock/unlock switch I wish to work it independently of my alarm system(which has the 3second pulse).

How do I create the 3 second pulse from the momentary contact switch ? Where would I get the necessary parts from ?

Appreciating your help,

fishmonks

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: January 06, 2003 at 3:27 PM / IP Logged

Im not quite sure what your asking. (sorry)Brian

kendoo130

Member - Posts: 11

Joined: January 06, 2003

Location: United States

Posted: January 07, 2003 at 1:00 AM / IP Logged

DEI sells what u need "pulse generator" it is programmable with dip switches to control how long you want it to pulse.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how do create a 3-second pulse ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.