Single Flasher Output

Home / the12volt's Install Bay / Relays / Single Flasher Output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pauliothegreat

Member - Posts: 2

Joined: June 25, 2006

Posted: June 25, 2006 at 2:30 PM / IP Logged

Hey ive been looking at the help pages on this site but i am unsure what setup i need. i have remote central locking kit that has a single flasher output and i wish to wire it to the two indicator wires without bridging the two and making all 4 flash with a left signal, did that :P

also what one off this page do you think i would need:

http://www.maplin.co.uk/Search.aspx?criteria=SPDT&doy=25m6&source=15

Many Thanks, Paul

Back to Top

pauliothegreat

Member - Posts: 2

Joined: June 25, 2006

Posted: June 25, 2006 at 4:47 PM / IP Logged

ok i have now read up on the relays and i believe i may have it. one thing i am unsure about thous is if i can use the positive output as the trigger as the tutorial says the negative. i dont see this being a problem but i wanted to check

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Single Flasher Output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.