driving light relay on pajero
Topic Closed)
Members
Search
Register
Login
Posted: February 19, 2007 at 4:58 PM / IP Logged
Do not concentrate on the finger, or you will miss all the heavenly glory.
Hi People,
I have installed some driving lights on my pajero, unfortunatly I have had a few issues wiring it up correctly, due to a negitive switching head light system (so I have been told) I have installed it like the picture.
The Headlight terminals work like this. when on low beam the lowbeam terminal is 12 and highbeam terminal is 0v. when the highbeam is on the lowbeam terminal is 0v and the High Beam terminal 12v. the common is always 12v.
Now that I have wired it as above. the driving lights come on when i have switched on my headlights and activated Highbeam. this is great.
however if i turn my manual switch off (luminated one) when the lights are on lowbeam the driving lights come on. This has gotten me very confused.Can any one help me with this?
Do not concentrate on the finger, or you will miss all the heavenly glory.
Posted: April 08, 2007 at 9:35 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Friday, May 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Friday, May 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
