prostart 2 button

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / prostart 2 button (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wiesh

Member - Posts: 1

Joined: November 25, 2009

Location: Alberta, Canada

Posted: November 26, 2009 at 12:04 AM / IP Logged

I hooked up a proatart system with 2 igntion output to a 1997 ford Taurus, which has 3 ignition wires, but I only used 2, The Blower doesn't work I need the third ignition wire hooked up, I can disconect the 2nd wire and hook it up to the third. I would like to have all three wires hooked up. Can I use a diode to go from the the second ignition wire to the 3rd? Or do I use a relay? Is there a diagram that shows how? Thanks

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: November 26, 2009 at 7:14 AM / IP Logged

You need to use a relay - a diode won't be able to safely carry the current. You can use the IGN2 output to trigger the relay.

Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

prostart 2 button

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.