viper 5301 wiring diagram

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / viper 5301 wiring diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wuzcrackin

Member - Posts: 10

Joined: January 23, 2010

Location: Arizona, United States

Posted: January 23, 2010 at 6:14 PM / IP Logged

Thanks in advance for any help.

Just purchased 2 Viper 5301 Remote starts. For a 2005 Nissan Titan, and a 2006 Nissan Maxima without smart key. Neither one of the Viper units came with the generic wiring diagram. I've found the vehicle specific info on this site but not the diagram for the viper.

wuzcrackin

Member - Posts: 10

Joined: January 23, 2010

Location: Arizona, United States

Posted: January 24, 2010 at 6:55 PM / IP Logged

After 2 days of looking I found it somewhere else. I don't know how to post it here so if anyone else needs it just shoot me a message.

blizz2005

Member - Posts: 5

Joined: January 24, 2010

Location: Alberta, Canada

Posted: January 25, 2010 at 3:09 PM / IP Logged

RED / white (-) 200ma trunk release output
red (+) 12vdc constant input
brown (-) horn honk ouput
WHITE/ brown light flash isolation wire
black (-) ground
violet (+) door triger input
blue factory horn input
green (-) door triger input n/c or n/o
BLACK/ white (-) dome light output
WHITE/ blue(-) remote start/ tutbo timer activation input
white parking light output
orange(-) ground when armed output

light GREEN/ black factory alarm disarm output
ORANGE / black aux 4 output
GREEN / WHITE factory alarm arm output
violet/black aux 2 ouput
WHITE/ black aux 3 output
WHITE/ violet aux 1 output
gray/black diesal wait to start
empty
violet/white tack input
dark/blue status output
pink/white flex relay control output
orange axxesory output
purple starter output
pink ignition 1 output
grey hood pin
blue/white 2nd statis / rear defrogger output
brown (+) brake shutdown input
BLACK/ white neutral safty input

pink ignition 1 input/output
RED / white fused (30a) ignition 2 flex relay input 87
orange accesory output
violet starter output
red fused (30a) igniton 1 input
pink/white ignition 2 / flex relay output
pink/black flex relay input 87a key side if required
RED / black fused (30a) accessory/ starter input

tyler armstrong

a99blackrt

Member - Posts: 1

Joined: March 11, 2008

Location: Kentucky, United States

Posted: September 19, 2010 at 4:21 PM / IP Logged

can you send me the install manual for this unit!

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: September 19, 2010 at 5:53 PM / IP Logged

In the downloads section is the Install Manual for the Viper 5301 in pdf format.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5301 wiring diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.