2007 chrysler aspen w/nav alpine

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2007 chrysler aspen w/nav alpine (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

omardesp

Member - Posts: 3

Joined: June 22, 2010

Location: California, United States

Posted: June 22, 2010 at 12:21 PM / IP Logged

please help !! Just got this truck and am attempting to install an amp. I have ran all wiring except for "remote" I can't find any where I can get this from. Please help...

omar e.

novice (beginner) :(

Back to Top

91stt

Silver - Posts: 564

This member consistently provides reliable information

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 22, 2010 at 2:13 PM / IP Logged

what radio are you using?

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

Back to Top

omardesp

Member - Posts: 3

Joined: June 22, 2010

Location: California, United States

Posted: June 22, 2010 at 2:15 PM / IP Logged

I am using the stock REC unit .... with navigation

alpine speakers with subwoofer

also, is there a amp somewhere ? i have all my panels off indes the truck and can't find a thing???

Back to Top

91stt

Silver - Posts: 564

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 22, 2010 at 3:04 PM / IP Logged

There is no conventional remote turn on wire for this car, it uses data to switch on and off.

The amp should be located in the right kick panel.

You can try a Directed (DEI) 55000, remote power adapter.

I have never used them but it is a possible option.

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

Back to Top

omardesp

Member - Posts: 3

Joined: June 22, 2010

Location: California, United States

Posted: June 22, 2010 at 3:58 PM / IP Logged

Thanks ...im going to try to see if i can get a remote signal from the amp first...... if not.... ill try the unit you have mentioned.

Thanks A Lot !!!

Back to Top

91stt

Silver - Posts: 564

Joined: May 24, 2006

Location: New Jersey, United States

Posted: June 22, 2010 at 4:52 PM / IP Logged

There are no switched 12V sources at the amp not headunit.

The only 12V sources are the B+ (constant 12V), yellow/red at the amp and gray/red at the radio.

The amp is turned on by the CAN bus and you will not be able to tap that for your remote turn on.

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007 chrysler aspen w/nav alpine

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.