mercedes vito 2004

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / mercedes vito 2004 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sky34

Member - Posts: 2

Joined: August 25, 2010

Location: United Kingdom

Posted: August 25, 2010 at 3:35 PM / IP Logged

I'm fitting a anti hi jack sytem to a 2004 mercedes vito van diesel euro model . The wires needed to be used are the indicators and ignition cut that will cut the ignition dead. Along with the door pin wire for the drivers side Thanks

I'm just a normal bloke. A normal bloke that likes a bit of torture

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 26, 2010 at 12:29 PM / IP Logged

Don't cut the ignition cut the starter. Probably purple.

Use the dome (courtesy) for door contact.

Indicators will be BLACK/ white and BLACK/ green, in engine bay fuse box where you will probably also find the starter wire.

I haven't done one this late but I'm sure everything is CAN based on that year.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 26, 2010 at 12:32 PM / IP Logged

By the way, it was only ever a Euro model, earlier versions had everything you need on the wiring going to the drop down fuse box in the steering column cowling. Pick up door contact on a BROWN / white going up one of the "A" pillars.

sky34

Member - Posts: 2

Joined: August 25, 2010

Location: United Kingdom

Posted: August 27, 2010 at 2:27 AM / IP Logged

Ok . But the starter is no good as an engine cut.

I need an ignition cut for the anti-hi jack. As it needs to cut the engine while it's running. Cutting it in stages to a gradual stop. Thus bringing the engine to a slow stop at the same time not losing power all at once to the brakes and power steering. This way the car will stop after a set time set by the timer on the anti -hi jack and not be come hard to control or crash. All the time the horn and indicators going off.

I'm just a normal bloke. A normal bloke that likes a bit of torture

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 27, 2010 at 2:35 AM / IP Logged

The only thing on the market meeting those requirements is a Clifford Blakjax.

If your Vito has the radio high up on the dash at an angle your OK

If the radio is lower with lock and courtesy light switches underneath it's CAN, go to the fuse box. They all changed over about Feb 05 but an 04 might still be non CAN

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mercedes vito 2004

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.