2010 mitsubishi outlander, f.a.s.t. key

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2010 mitsubishi outlander, f.a.s.t. key (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sharpie22

Member - Posts: 1

Joined: November 21, 2011

Posted: November 21, 2011 at 1:10 PM / IP Logged

Can someone please provide the correct wiring for a remote/alarm install. Also, any information on how to bypass the F.A.S.T. key would be much appreciated.

Thank you.

Back to Top

ropuma

Copper - Posts: 102

Joined: February 16, 2010

Location: Illinois, United States

Posted: January 02, 2012 at 9:25 PM / IP Logged

MODEL	YEAR(S)
OUTLANDER	2007 -2011

KEY	T-HARNESS	IMMOBILIZER
N/A	N/A	MITSUBISHI'S TRANSPONDER SYSTEM, See NOTE #1

PART	COLOR	LOCATION	DIAGRAM
12 VOLT CONSTANT	WHITE (+)	@ FUSE BOX, (BLACK, 2-PIN PLUG), PIN 1
STARTER	ORANGE (+)	@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5
STARTER 2	N/A
IGNITION 1	WHITE (+)	@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	LT. GREEN (+)	@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 6
ACCESSORY /HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	YELLOW(+)(Left) and BROWN(+)(Right) (Requires 775 Relay)	@ FUSE BOX, (WHITE, 20-PIN PLUG), PINS 10 and 13
POWER LOCK	WHITE/ BLACK (TYPE B)	in DRIVERS KICK PANEL, (BROWN, 24-PIN PLUG), PIN 2
POWER UNLOCK	RED / YELLOW (TYPE B)	in DRIVERS KICK PANEL, (BROWN, 24-PIN PLUG), PIN 3
LOCK MOTOR WIRE	RED / GREEN or RED (5-Wire Type)	@ FUSE BOX, (WHITE, 19-PIN PLUG), PIN 6
DOOR TRIGGER	YELLOW (-)	@ FUSE BOX, (BROWN, 16-PIN PLUG), PIN 16
DOMELIGHT SUPERVISION	YELLOW (-)	@ FUSE BOX, (WHITE, 6-PIN PLUG), PIN 5
TRUNK RELEASE	BROWN (-)(Use RELEASE Motor wire if not Present), NOTE #2	@ FUSE BOX, (BROWN, 16-PIN PLUG), PIN 14
SLIDING POWER DOOR	N/A
HORN	GREEN (-)	@ HORN SWITCH or FUSE BOX, (WHITE, 19-PIN PLUG), PIN 19
TACH	Any wire NOT RED / WHITE(4-CYL) or BLUE(V6) (AC)	@ Any FUEL-INJECTOR
WAIT TO START LIGHT	N/A
BRAKE	RED / WHITE or RED (+)	@ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, Harness to REAR of Vehicle
FACTORY ALARM DISARM	DISARMS with FACTORY REMOTE ONLY!!
ANTI-THEFT	MITSUBISHI'S TRANSPONDER SYSTEM, See NOTE #1	@ IGNITION SWITCH TUMBLER

NOTES

NOTE #1: MITSUBISHI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,

Part # 791 Bypass Module (for REMOTE STARTING ONLY!) an Extra Ignition key is

required to be placed inside this module for Operation.

Part # XK09 Bypass Module, this Module is a KEYLESS BYPASS MODULE and DOES

NOT require a Key to be placed inside the Module for Operation, this module will also

do the Keyless Entry.

NOTE #2: TEST this wire while Opening the LIFTGATE from the Handle on the REAR of the

Vehicle.

LINK 1	LINK TEXT 1	LINK 2	LINK TEXT 2

EXTRA INFORMATION

For bypass use" EVO CAN " OR "EVO ALL" FROM FORTIN ELECTRONICS.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 mitsubishi outlander, f.a.s.t. key

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.