the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring, nonamp 2010 hyundai accent

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / wiring, nonamp 2010 hyundai accent (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
addicted 
Copper - Posts: 59
Copper spacespace
Joined: May 27, 2005
Location: United States
Posted: December 10, 2011 at 11:14 PM / IP Logged  
2010 hyundai accent, 4door, base model. Im looking for a switched 12v. Source to use as a remote for a amp i installed.
it calls me...
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 11, 2011 at 6:35 AM / IP Logged  
Is there an antenna remote either wire or terminal on the radio which goes 12v+ when the radio is turned on?
Otherwise, the ACC wire at the ignition switch, fuse box or rear of the radio.
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: December 11, 2011 at 8:55 AM / IP Logged  
wiring, nonamp 2010 hyundai accent -- posted image. Battery RED (+) RADIO HARNESS
wiring, nonamp 2010 hyundai accent -- posted image. Accesory GREEN (+) RADIO HARNESS
wiring, nonamp 2010 hyundai accent -- posted image. Ground BLACK & GRAY/BLACK (-) RADIO HARNESS
wiring, nonamp 2010 hyundai accent -- posted image. Illumination YELLOW (+) RADIO HARNESS
wiring, nonamp 2010 hyundai accent -- posted image. Power Antenna PINK (+) RADIO HARNESS
wiring, nonamp 2010 hyundai accent -- posted image. Amp Turn On BLUE (+) RADIO HARNESS
wiring, nonamp 2010 hyundai accent -- posted image. LF Speaker (+) BROWN wiring, nonamp 2010 hyundai accent -- posted image.
wiring, nonamp 2010 hyundai accent -- posted image. LF Speaker (-) WHITE
wiring, nonamp 2010 hyundai accent -- posted image. RF Speaker (+) BLACK
wiring, nonamp 2010 hyundai accent -- posted image. RF Speaker (-) YELLOW
wiring, nonamp 2010 hyundai accent -- posted image. LR Speaker (+) RED
wiring, nonamp 2010 hyundai accent -- posted image. LR Speaker (-) BLUE
wiring, nonamp 2010 hyundai accent -- posted image. RR Speaker (+) ORANGE
wiring, nonamp 2010 hyundai accent -- posted image. RR Speaker (-) GREEN
wiring, nonamp 2010 hyundai accent -- posted image. Amp Location RIGHT SIDE OF TRUNK/CARGO AREA BEHIND TRIM
addicted 
Copper - Posts: 59
Copper spacespace
Joined: May 27, 2005
Location: United States
Posted: December 11, 2011 at 12:43 PM / IP Logged  
Hm I was hoping to tap off of the fuse box source.
it calls me...
addicted 
Copper - Posts: 59
Copper spacespace
Joined: May 27, 2005
Location: United States
Posted: December 11, 2011 at 12:45 PM / IP Logged  
The green wire should be the same for a base model that has no stock amp?
it calls me...
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 11, 2011 at 5:21 PM / IP Logged  
Help us here and start testing yourself.
addicted 
Copper - Posts: 59
Copper spacespace
Joined: May 27, 2005
Location: United States
Posted: December 14, 2011 at 10:06 AM / IP Logged  
I assumed some one might have a location without getting behind the stock deck. Im aware of diagram, but it did not specify for the base model.
it calls me...
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 14, 2011 at 10:11 AM / IP Logged  
The answers you were given here were from pros, therefore the correct way.
If you use an ignition or ACC wire, you're likely to induce a whine through the amp when the radio is switched off.
I might add we are here to give you advice not hold your hand so buy a tester and pull the head unit.
What's next? Where are the grommets in the bulkhead?
addicted 
Copper - Posts: 59
Copper spacespace
Joined: May 27, 2005
Location: United States
Posted: December 20, 2011 at 5:41 PM / IP Logged  
Hey buddy relax and smoke some ganja. Im not a pro. A stupid question is not asked.
it calls me...
addicted 
Copper - Posts: 59
Copper spacespace
Joined: May 27, 2005
Location: United States
Posted: December 20, 2011 at 7:51 PM / IP Logged  
Some of the wires are not the same. There is no remote wire for the non amplified base model 4 door accent 2010. How ever I did tap off the green wire and no engine noise. I did find it very easy to get the stock deck out. Atleast I got to post my solved problem for anyone that has base model amp install
it calls me...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer