the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 malibu, keyless entry wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
manny p 
Member - Posts: 19
Member spacespace
Joined: April 06, 2012
Location: Ontario, Canada
Posted: October 30, 2012 at 5:37 PM / IP Logged  
Im looking for a wiring diagram for a 2006 chevy malibu. The factory remotes arent working and I want to install an aftermarket keyless entry with trunk release.
Manny
itsyuk 
Silver - Posts: 505
Silver spacespace
Joined: February 23, 2010
Location: United States
Posted: October 30, 2012 at 7:39 PM / IP Logged  

i dont have for a 2006 but i had this for a 2005.

2006 malibu, keyless entry wiring -- posted image.

yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 01, 2012 at 11:17 AM / IP Logged  
Power Unlock ORANGE (-) AT PASSENGER FUSEBOX   
PowerLock BLACK/ BLUE (-) AT PASSENGER FUSEBOX
Trunk Release WHITE (+) AT DRIVER SIDE FUSEBOX
manny p 
Member - Posts: 19
Member spacespace
Joined: April 06, 2012
Location: Ontario, Canada
Posted: November 02, 2012 at 7:19 PM / IP Logged  
do you know the door pin wire color or domelight supervision wire?
Manny
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 02, 2012 at 7:39 PM / IP Logged  
All Door Trigger BLACK/ WHITE (-) AT PASSENGER SIDE FUSEBOX
   TO AVOID DOMELIGHT DELAY USE INDIVIDUAL DOOR TRIGGERS
Domelight Super BLACK/ WHITE (-) AT PASSENGER SIDE FUSEBOX
manny p 
Member - Posts: 19
Member spacespace
Joined: April 06, 2012
Location: Ontario, Canada
Posted: November 24, 2012 at 10:34 PM / IP Logged  
I  installed the keyless entry today.I  could not find any of the wire colors mentioned above for the door locks.I did find the door pin,trunk release and parking light wire in the drivers kick panel.Anybody know what color the lock/unlock wires are on the 2006 malibu or is there a module I cn use to tie into the factory system.
Manny
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 24, 2012 at 10:51 PM / IP Logged  
Directwire
Power Lock white - driver kick or BCM, gray 72 pin plug (C1), pin 66
Notes: The BCM (Body Control Module) is part of the fuse/relay box on the front passenger side of the center console.
Power Unlock same as power lock -1.5K ohms   
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 24, 2012 at 10:55 PM / IP Logged  
Audiovox
Power Unlock WHITE (-) AT BCM C1 72 PIN GRAY CONNECTOR PIN 67
   PIN #66 - TAN PLUG   
PowerLock WHITE (-) AT BCM C1 72 PIN GRAY CONNECTOR PIN 67 USE RELAY WITH A STRAIGHT GROUND
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 24, 2012 at 11:10 PM / IP Logged  
Sorry about the incorrect lock wires don't know what happened. As you can see Directwire and Audiovox differ on pin location but same wire color.
manny p 
Member - Posts: 19
Member spacespace
Joined: April 06, 2012
Location: Ontario, Canada
Posted: November 27, 2012 at 8:41 PM / IP Logged  
I want to incoporate the factory alarm with the keyless entry I installed.If I tie into the factory alarm arm/disarm wire can I use the lock/unlock output wires to turn on/off the facory alarm?Should I diode isolate these wires so they dont feed back into each other?Any sugestions/ideas would be appreciated.
Manny
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer