clifford matrix rs 1.1l remote start wiring

I recently purchased a Clifford Matrix RS 1.1L remote start, and it didn't come with any of the wiring information. After calls to several installers in the area, and directed electronics, no body will share the wiring diagram for this set up unless they are talking to an "authorized dealer". They don't care how much installation or electrical experience I have, they want me to pay $300 to have it installed. Does anyone happen to have the installation manual laying around that they could scan or take pictures of? Thank you very much and I hope someone can help so I'm not out this money!

I think the one you are looking for is in the download section of this site.  Just click on the download tab, do a search for clifford and I think is is on the 3rd page.When all else fails, Read the Instructions

Support the12volt.com Make a Donation

The RS 1.1 is in there, but not the 1.1L. There are more wires in the one I have. I tried using the one on here first, but it doesn't match up enough

How about this link:  http://www.directed.com/guides/manuals/ig/clifford/n909552.pdfWhen all else fails, Read the Instructions

Support the12volt.com Make a Donation

That is the same manual I have now, and it doesn't work for the 1.1L. The 1.1 has 6 wires in the main harness and the 1.1L has 8. Directed electronics make several brands, and viper and clifford are the only ones that they "require professional installation". I found an Avital remote start that has an identical harness to the clifford that I have, Im gunna roll with that one and see what happens!