1998 Toyota sienna

Hi all:  I am installing a Clifford Matrix3 alarm to the 98 Sienna, and have got a wiring diagram from the vehicle information database, but it seem to have some errors in the vehicle wiring table. I could not find the door lock wires and door trigger wires based on the wiring table. The wire colors were different and the locations were unclear.  I need the wire colors and location of the connectors  Can anybody please help! richardwin

Hi, I'm currently working on a '98 Sienna. It already had an alarm in it, so I'm taking that one out first. Refer to this post that I had created asking some Sienna questions. At the bottom of that page, there's a diagram on how the old alarm was hooked up for the door locks. I think they used the diode for the child locks. The connector was at the back and bottom of the fuse panel under the driver's dash. Also in that same connector was the door trigger wire, I believe it was RED / white. Does this help? I'm looking for the rear defrost wire...can't find it without going to the switch (even then I'm not sure which one it is).Q: What's the best nation in the world?

A: Donation!     Donate to the12volt.com