the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

GM factory arming


Post ReplyPost New Topic
< Prev Topic Next Topic >
corraudio 
Member - Posts: 28
Member spacespace
Joined: January 14, 2004
Location: Canada
Posted: January 14, 2004 at 9:57 PM / IP Logged  

2002 Buick Rondevouz, 2000 Impala, 1997 Grand Prix

need to find the factory "Arm" wires........Anyone?

Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: January 14, 2004 at 10:05 PM / IP Logged  

I,m not quite sure since i never really tried it, but I noticed if you lock it with the door open once you will hear a beep, then lock it a second time then it will lock doors and set factory alarm. So if you can make a set up with a timer and a double pulse module, to make it look as if the door were open while locking and second pulde will lock and set factory alrm. I guess it would work , but then agin seem like a lot work to me.these applis to all three cars.    GM factory arming -- posted image.

Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
corraudio 
Member - Posts: 28
Member spacespace
Joined: January 14, 2004
Location: Canada
Posted: January 14, 2004 at 10:16 PM / IP Logged  

Tried that already...

it seems that all the tech sites i go to, none list the Arm wire for these three cars

Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: January 14, 2004 at 10:22 PM / IP Logged  
yes I noticed I checed a few of my programs and they all dono,t list an arm wire, I guess it only arms by transmitter   GM factory arming -- posted image. on of my programs say is a BLUE wire negative for the 2000 Impala, at door pin-pulse while,locking. good luck
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
corraudio 
Member - Posts: 28
Member spacespace
Joined: January 14, 2004
Location: Canada
Posted: January 14, 2004 at 10:32 PM / IP Logged  
thanks Luis, ill give that a try

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer