2003 s10 remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 s10 remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 15, 2004 at 10:01 PM / IP Logged

i installed a bull dog rs1200ep in my s10. every thing works fine except the engine light comes on... bull dog keeps telling me its the 2nd ignition wire, but the wire is not loose anywhere. is there a 3rd ignition on this vehicle? or another accessory wire that might not be hooked up. i used the t-harness they supplied, but its all been a pain since day one. i dont recommend anyone ever get there products. can some one please help me?

joe

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: January 15, 2004 at 10:54 PM / IP Logged

Joe there are two diagrams in this post. Did you hook up both ignitions? The pink and the white?

https://www.the12volt.com/installbay/forum_posts.asp?tid=23415&PN=1

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 15, 2004 at 11:17 PM / IP Logged

yeah i hooked up the pink and the white. bulldog told me to jump a brown wire to the orange accessory in the ignition harness. i just dont trust what they say any more. i have been getting the run around since november from them. also there is two wire diagrams on this site. one shows 3 ignitions and the other shows hvac 1 &2.

Montrealler

Copper - Posts: 155

Joined: October 05, 2002

Location: Canada

Posted: January 16, 2004 at 7:57 AM / IP Logged

Where did you grab the tach?

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 16, 2004 at 8:10 AM / IP Logged

didn't use the tach. i used the tachless mode because the vehicle runs fine without it. bulldog told me that it had somthing to do with the second ign wire, but one of the diagrams in this post shows 3 ign wires. would it help to hook up the 3rd wire?

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: January 16, 2004 at 10:51 AM / IP Logged

It says 3rd ignition: N/A, so you don't have a third ignition.

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 16, 2004 at 11:54 AM / IP Logged

what about 2nd acc. wire?

mellokat

Member - Posts: 1

Joined: December 20, 2003

Location: United States

Posted: January 16, 2004 at 12:47 PM / IP Logged

did you check to see if the bulldog unit itself is indeed powering up the pink/white 2nd ign line?

bulldog is notorious for faults such as those,

we even refuse to install their product.

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 16, 2004 at 1:12 PM / IP Logged

yes it powers up and it does it in all the right possitions

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 17, 2004 at 5:47 PM / IP Logged

even though it does power up, my engine light stays on. i redid all of my connections last night and i am just waiting for the engine light to go out so i can see if it was just a bad connection. does any one know how to get the light to go off?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.