the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1991 Honda Civic wiring .


Post ReplyPost New Topic
< Prev Topic Next Topic >
jc18 
Member - Posts: 15
Member spacespace
Joined: February 02, 2004
Location: United States
Posted: February 04, 2004 at 5:42 PM / IP Logged  
is their a way to get a full car schematic for a 1991 honda civic? There are several unused conectors that I would like to know what their for and/or where they go.
Teamrf 
Gold - Posts: 1,031
Gold spacespace
Joined: January 13, 2004
Location: United States
Posted: February 04, 2004 at 6:11 PM / IP Logged  
What do you mean by unused connectors?
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
itmdtr 
Copper - Posts: 131
Copper spacespace
Joined: May 23, 2003
Location: United States
Posted: February 04, 2004 at 6:23 PM / IP Logged  

The plugs are possibly for options not on your car at time of sale.

Ex: Fog Lamps, Cruise Control, Air Conditioning.

They use the same harness to cut down on cost. You wouldnt want 10 or so different harnesses for the same model car.

Where abouts are the plugs located?

itmdtr
jc18 
Member - Posts: 15
Member spacespace
Joined: February 02, 2004
Location: United States
Posted: February 04, 2004 at 7:13 PM / IP Logged  

The unused plugs are just connecters that come from the harness and arn't connected to anything.

 I'm primarly interested in a unused plug that's almost between the glove box and the heater blower. it's underneth the dash board and looks like a glovebox light or somthing. the other is on the ciggeret plug, not the round one ( the one you disconect to take the center console off), there is two wires for the ciggeret plug and then two more unconected wires in the same plug. Could this be a ashtray light ?

By the way, it has A/C, Cruise, automatic

jc18 
Member - Posts: 15
Member spacespace
Joined: February 02, 2004
Location: United States
Posted: February 05, 2004 at 10:04 AM / IP Logged  

I forgot to metion that i'm also intrested in the unused connectors on the fuse panel. I looked in a 89 service manual but all it says is "option".

I'd like to know what they are for so mabye i can get the options and or get a "ignition on" signal for an amp or somthing.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer