the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring diagram for 2001 dodge caravan


Post ReplyPost New Topic
< Prev Topic Next Topic >
Iatm 
Member - Posts: 4
Member spacespace
Joined: June 03, 2004
Location: Canada
Posted: June 03, 2004 at 6:21 PM / IP Logged  
Looking for wiring diagram to install remote starter into a 2001 dodge caravan.
boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: June 03, 2004 at 8:26 PM / IP Logged  

Dodge

Caravan

2001-2001

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

YELLOW

IGNITION SWITCH HARNESS

Ignition  #1:

 

PINK/WHITE

IGNITION SWITCH HARNESS*

Ignition #2:

 

N/A

Ignition  #3:

 

N/A

Accessory:

 

N/A

Brake  Light:

 

WHITE/ BLACK

AT SWITCH ABOVE BRAKE PEDAL

Tach  Signal:

 

Parking Lights:

 

WHITE/ BROWN (-)

AT HEADLIGHT SWITCH**

Headlights:

 

OEM Alarm  Disarm:

 

VIOLET/LT. BLUE

AT PLUG AT PCM ON FIREWALL DRIVER'S SIDE ***

OEM Alarm  Arm:

 

VIOLET/LT. BLUE

AT PLUG AT PCM ON FIREWALL DRIVER'S SIDE ***

Diesel  Glow Plug:

 

N/A

Clutch  Bypass Wire:

 

N/A

Notes:

 * This Vehicle May Be Equipped With A Transponder Theft System That Can Be Identified By A Gray Ignition Key. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. ** The parking lights are negative trigger through a 2.1k (2100) ohm resistor. *** Disarm is negative trigger through a 9.1k (9100) ohm resistor. Arm is negative through a 1.5k (1500) ohm resistor. ATTENTION- Some of these vehicles fall under a campaign program though the manufacturer to upgrade the computer system when the vehicle is serviced at the dealer. After the upgrade is complete the vehicle may not remote start. The solution is to add the second start wire as per the 2002+ Chrysler Mini-Vans. Unfortunately, feedback from installers indicates it is not possible to add the second start wire prior to the computer upgrade procedure as unexpected vehicle behavior may result. If the upgrade has been performed connection of the second start wire is required. See Note #162

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer