2004 durango disarm

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2004 durango disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

autofx

Member - Posts: 2

Joined: May 12, 2004

Location: United States

Posted: November 19, 2004 at 5:40 PM / IP Logged

Has anyone figured out how to disarm the factory alarm. When I use the aftermarket alarm to arm the system, the factory alarm senses the door locking and arms the factory alarm. I wish I had access to DEI tech, or Alldata. If anyone has any ideas, or even guesses, I'd love to hear them.

Thanks, Danny@Auto F/X

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: November 19, 2004 at 5:48 PM / IP Logged

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: November 19, 2004 at 5:56 PM / IP Logged

Your other options are to sell them a stand alone remote start that doesn't have keyless, an OEM add-on remote start system, OR hack up the factory key and solder wires onto the keyless circuit board inside the key for unlock. Use a relay that activates when you hit unlock, which would cause 87 & 30 to be common and activate the unlock on the factory keyless. Your basically just simulating pushing a button. Only issue is when the battery in the OEM key dies they will need for it to be replaced.. Good luck,

Mike

Back to Top

Baxter1222

Member - Posts: 3

Joined: November 19, 2004

Location: United States

Posted: November 20, 2004 at 12:18 AM / IP Logged

TRY DOUBLE PULSING YOUR UNLOCK OUTPUT FROM THE ALARM

bax

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 durango disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.