nissan pulsar gtir 1990

im looking for the wirering diagram for fitting an alarm help in this matter would be helpfull cheers allhope to get better

That is the only year I have avaiable for you. DIRECTWIRE™ WIRING INFORMATION - NISSAN / PULSAR / 1989 / Security 12volts BLACK/ red    +   ignition harness Starter BLACK / YELLOW    +   ignition harness Ignition BLACK/ white    +   ignition harness Power Lock add actuators        Power Unlock add actuators        Lock Motor           Unlock Motor           Disarm Defeat           Parking Lights+ GREEN/ black      steering column Parking Lights-           Hazards           Turn Signal(L)           Turn Signal(R)           Door Trigger yellow/purple    -   kick panel Dome Supervision           Trunk/Hatch Pin RED / black    -   light or sw. in trunk Hood Pin           Trunk/Hatch Release           Power Sliding Door           Factory Alarm Arm           Factory Alarm Disarm           Disarm No Unlock           Tachometer RED / white   AC   at instrument cluster Horn Trigger GREEN/ black    -   steering column Memory Seat 1           Memory Seat 2           Memory Seat 3           Interface Module: Category: Immobilizer Bypass Required: No Type: N/A Part #: N/A Notes:        This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information. Be careful whose advice you buy, but be patient with those who supply it.