04 Silverado Back up sensor install

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 04 Silverado Back up sensor install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

KWshrider

Member - Posts: 1

Joined: November 16, 2004

Location: United States

Posted: October 07, 2005 at 12:25 PM / IP Logged

To All, I wasn't sure where one of these would fit in but am installing an aftermarket parking assist sensor system on an '04 silverado crew cab and am looking for the reverse light wire and brake light wire up under the dash.

This system has four sensors in the back and two up front which engage when the vehicle is put in reverse or when the brakes are applied and changes pitch as the vehicle gets closer to an object when parking in close areas. Any assistance anyone can send my way would be greatly appreciated

V/R,

Steve

Steve R

Key West, FL

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 07, 2005 at 1:54 PM / IP Logged

On the rear of the vehicle there should be a tow hook up. you can get the "reverse wire" in this harness. Or if you want you can get it niside the tail light at the bulb. If your gonna tow a truck youll want to install a toggle switch. if not it can all be wired at the rear of the truck. The reverse wire is 12v and the other hook up is ground....easy. I would go inside the tail light....fewer wires to test

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 07, 2005 at 3:16 PM / IP Logged

If this is a Rostra back up unit, all you need to do is hook up the reverse lights for the module which is RED at the ECU PIN13 . ECU IS TO THE FAR RIGHT BEHIND GLOVE BOX

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 Silverado Back up sensor install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.