the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

isuzu rodeo wiring diagram


Post ReplyPost New Topic
< Prev Topic Next Topic >
isuzumistake 
Member - Posts: 2
Member spacespace
Joined: February 01, 2003
Location: United States
Posted: February 01, 2003 at 8:04 PM / IP Logged  

If anyone can help I need a wiring diagram for installin a keyless entry on a 2002 isuzu rodeo. I also cound use a wiring diagram for  the steering wheel wires.

Thanks

isuzumuzu
Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: February 01, 2003 at 9:17 PM / IP Logged  

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|white, WHITE/ black  |+  |ignition harness            |
|          STARTER|BLACK/ white         |+  |ignition harness            |
|         IGNITION|BLACK / YELLOW        |+  |ignition harness            |
|  SECOND IGNITION|BLACK/ red           |+  |ignition harness            |
|        ACCESSORY|blue                |+  |ignition harness            |
|       POWER LOCK|lt. GREEN/ red       |-  |DKP white 22 pin connector  |
|     POWER UNLOCK|RED / blue            |-  |DKP white 22 pin connector  |
|       LOCK MOTOR|blue/red            |   |drivers door harness        |
|     UNLOCK MOTOR|blue/white          |   |drivers kick panel *1       |
|    DISARM DEFEAT|blue                |   |passenger kick panel *2     |
| PARKING LIGHTS +|GREEN/ red           |   |drivers kick in a black plug|
| PARKING LIGHTS -|yellow or grn/yel   |   |steering column             |
|       HEADLIGHTS|red or RED / blue     |-  |steering column             |
|     DOOR TRIGGER|RED / green           |-  |drivers kick in a white plug|
| DOME SUPERVISION|use door trigger    |   |                            |
|  TRUNK/HATCH PIN|tied in with door   |   |                            |
|         HOOD PIN|GREEN/ red           |-  |keyless module *3           |
|TRNK/HTCH RELEASE|lt. green           |   |keyless module *3           |
|  FCTRY ALARM ARM|purple *5           |-  |drivers kick in a white plug|
|FCTRY ALRM DISARM|yellow/blue *5      |-  |drivers kick in a white plug|
Notes:  Is up to the installer to test all wire whenever possible with a DDM

*1 In a white 10 pin connector  *2 Located up high in a white connector  *3 The keyless module is located to the right of the glove box. *5 Trigger the power lock and the factory alarm arm wires at the same time to arm the alarm.  Trigger the power unlock and the factory alarm disarm wires at the same time to disarm the alarm.

Luis

Sound Waves   

isuzumistake 
Member - Posts: 2
Member spacespace
Joined: February 01, 2003
Location: United States
Posted: February 01, 2003 at 11:12 PM / IP Logged  
thanks, I really appreciate the help.
isuzumuzu

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer