the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

alarm wiring diagram


Post ReplyPost New Topic
< Prev Topic Next Topic >
clock97 
Member - Posts: 11
Member spacespace
Joined: July 04, 2006
Location: United States
Posted: April 01, 2007 at 8:02 AM / IP Logged  
i need a wiring diagram for a 2000 chevy 2500 full-size cargo van. thanks
fkelsey 
Copper - Posts: 94
Copper spacespace
Joined: March 16, 2007
Posted: April 01, 2007 at 10:54 AM / IP Logged  
12volts red or RED / white    +   ignition harness
Starter yellow    +   ignition harness
Second Starter          
Ignition pink    +   ignition harness
Second Ignition pink/white or white    +   ignition harness
Third Ignition          
Accessory orange    +   ignition harness
Second Accessory          
Keysense          
Power Lock lt. blue    +   drivers door harness
Power Unlock white    +   drivers door harness
Lock Motor gray      drivers kick panel
Unlock Motor tan      drivers kick panel
Parking Lights+ brown      light switch
Parking Lights-          
Hazards          
Turn Signal(L)          
Turn Signal(R)          
Reverse Light          
Door Trigger purple    -   drivers door harness
Dome Supervision          
Trunk/Hatch Pin ORANGE / black    -   at light in rear cargo area
Hood Pin          
Trunk/Hatch Release          
Power Sliding Door          
Factory Alarm Arm          
Factory Alarm Disarm          
Disarm No Unlock          
Tachometer white      VCM
Notes: The VCM is located under the hood on the drivers inner fender well. The white wire is located in a black plug labeled white.
Diesel wait to start wire is dk. blue (-) located at the instrument cluster see direct fax document #1090.
Wait to start          
Brake Wire white    +   stop light switch
Parking Brake          
Horn Trigger black    -   above ignition harness
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
Passlock II
Part #: 1100F
Alternate Part1 #: 1100X
Alternate Part2 #: 556LW
Alternate Part3 #: 555LW
Alternate Part4 #: DesignTech 20402
Alternate Part5 #: DesignTech 29402
Notes: When using the 1100F or 1100X, a software change to 1100GM is needed.
Interface Module: Category:
Door Lock Interface Required:
No Type:
N/A
Part #: N/A
Notes:
Interface Module: Category:
Combo Interface Required:
Yes Type:
Data Bus
Part #: 1700G
Alternate Part1 #: 457GW
clock97 
Member - Posts: 11
Member spacespace
Joined: July 04, 2006
Location: United States
Posted: April 01, 2007 at 11:27 AM / IP Logged  
thank you, thank you, thank you alarm wiring diagram -- posted image.
fkelsey 
Copper - Posts: 94
Copper spacespace
Joined: March 16, 2007
Posted: April 01, 2007 at 2:12 PM / IP Logged  
No problem bro just let me know if you need anything else.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 30, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer