yukon amp bypass

on an 03 gmc yukon XL the factory amp is fried, oem radio will no longer work because of it. new radio is going in but i also need to bypass the amp so the speakers will run solely off the new radio's built-in amplifier. Any ideas on an easier way to do this than running all new speaker wire from each bose speaker up to the radio?heather marie

The Bose factory amp is right behind the glove box. Easiest way to do this is to run some 9 wire (or some speaker wire) from the radio to this amp. All the wires are factory colors and are Front left: Tan(+) Grey(-) Front Right: light green(+) dark green(-) Rear Left: brown(+) yellow(-) Rear Right: dark blue(+) light blue(-) If you need more help let us know, or feel free to pm me and I'll try to help you out more. Welcome to the12volt.com rtfm

thanks so much for the help...turned what i thought would be a 2 hour or more install only took half an hour and it worked great. Thanks again!heather marie

its no problem. I'm really glad I could help and that something I said was useful, lol.rtfm