avic n3 won't power on

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / avic n3 won't power on (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

colo_evo

Member - Posts: 2

Joined: March 14, 2009

Posted: March 14, 2009 at 11:44 PM / IP Logged

Hey,

I just got a used n3. I tried hooking it to my car and the unit will not power on, but i do get the red blinking l.e.d under the faceplate.

does the nav have to be installed also? i just tried powering on the h/u to make sure everything works, but i can't get it to power on???

I connected the power and red wire to +12 and the black to ground. Is there something im forgetting?

colo_evo

Member - Posts: 2

Joined: March 14, 2009

Posted: March 15, 2009 at 12:42 AM / IP Logged

Nevermind! solved my problem... the brain has to be connected.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avic n3 won't power on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.