the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

flip down


Post ReplyPost New Topic
< Prev Topic Next Topic >
Lokim 
Member - Posts: 12
Member spacespace
Joined: November 28, 2003
Posted: April 26, 2004 at 10:29 AM / IP Logged  

What is the difficulty level of installing one of these bad boys?  someone refer me to an instructional site.

Autoobsession 
Copper - Posts: 119
Copper spacespace
Joined: April 29, 2004
Location: United States
Posted: May 01, 2004 at 9:06 PM / IP Logged  
Well this all depends on what kind of flipdown you are installing and in what type of car you are installing it into. Usually all you really need to install a flip down is the monitot, the monitor trim ring and a piece of wood that would be mounted above the headliner where the screen would mount to. If you have a flip down all the mounting instructions should be included in the installation manual.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer