the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Mobile Video Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
sickhonda 
Member - Posts: 17
Member spacespace
Joined: August 28, 2002
Location: United States
Posted: August 28, 2002 at 5:05 PM / IP Logged  

Mobile Video Wiring -- posted image.  Hello everyone!  I'm so new that when I posted my very first topic in this forum, I can't seem to locate it anywhere afterwards, so I have no choice but to post it again.

I'm a DIY type guy, trying to save a buck or two.  I already installed my Pyle PLTVD700 CD/DVD Player, equipped with single 12V remote power output line.  I want to utilize this line to power up my monitor.  My monitor is currently being juiced up by the cigarette lighter plug adapter.  My intention is to cut this adapter wire and connect the positive wire (black with white stripe) with the single remote wire.  The negative wire (solid black) to be connected to the car chassis.  Not sure if I identified the wires correctly, please feel free to correct me on this.  My other question or concern is, does this remote power output line have enough juice to power up my monitor?  My monitor requires an input voltage of DC 11-13V and power of 9.5W.  I appreciate any help HELP.

Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: August 29, 2002 at 7:48 PM / IP Logged  

Typically, the remote turn-on wire of the head unit will be blue/white; is that what yours is?

That wire is only intended to "tell" amplifiers or other equipment to turn itself on.  The blue wire puts out only a tiny amount of power; not even enough to power up your monitor.  But that can be fixed with an ordinary SPDT automotive relay.

85 goes to ground.  86 goes to the blue/white from your CD player.  87 goes to a known good (and fused) source of constant 12-volts positive.  87a is left empty.  30 goes to your outboard monitor.

sickhonda 
Member - Posts: 17
Member spacespace
Joined: August 28, 2002
Location: United States
Posted: August 30, 2002 at 9:00 AM / IP Logged  
Quote: Originally posted by Chris Luongo on August 29, 2002

Typically, the remote turn-on wire of the head unit will be blue/white; is that what yours is?

That wire is only intended to "tell" amplifiers or other equipment to turn itself on.  The blue wire puts out only a tiny amount of power; not even enough to power up your monitor.  But that can be fixed with an ordinary SPDT automotive relay.

85 goes to ground.  86 goes to the blue/white from your CD player.  87 goes to a known good (and fused) source of constant 12-volts positive.  87a is left empty.  30 goes to your outboard monitor.


Mobile Video Wiring -- posted image.  It's actually a CD/DVD Player not a head unit.  Normally, head units are in-dash type radios.  Anyway, I have a single solid blue wire, attached with fuse holder that has a 0.5A/250V fuse inside.  The manual indicates that it provides a DC 12V/0.5A output when unit is powered up.  When unit is turned off, no output.  I guess, from my understanding, it will provide a constant 12V  power to my monitor when unit is turned on, and off when turned off.  Not just a jolt of power to tell the system to turn itself on, then power down.  My concern is with the monitor wiring.  Did I identify the wires correctly and will my intended connection/wiring pattern work?  Thanking you in advance for any input into this post.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: September 01, 2002 at 11:25 PM / IP Logged  
Yes, you have it right.  And I suppose there is a good chance that the Pyle's .5-amp output will be sufficient to drive the small monitor.  Go ahead and try it, but be ready to use the relay method if it doesn't work.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer