There is No AVIC-N2 Code!

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / There is No AVIC-N2 Code! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Rollngthndr

Member - Posts: 1

Joined: November 15, 2002

Location: United States

Posted: April 26, 2005 at 9:03 AM / IP Logged

Ok, so I have read most of the posts here that say you only have the code if your paycheck says Pioneer on it, and that is not true. MY PAYCHECK has Pioneer on it and I can tell you that there is no code. I did see the way to get around it on here though. Oh and there is one more way...but it has nothing to do with a stinkin code.

creeval

Member - Posts: 2

Joined: April 26, 2005

Location: United States

Posted: April 26, 2005 at 9:39 AM / IP Logged

I am sure most here understand that now due to NOTHING being available on the internet except the loop back to the camera in which pretty much is pointless if you have a destination mapped out for those that are going to go to that extent. I think the most important thing that was left out is not being able to re-route NAV on the go. Is this other way or anyway you know of able to do that?

-CV

12v_rep

Copper - Posts: 188

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 28, 2004

Location: United States

Posted: April 26, 2005 at 10:59 AM / IP Logged

I agree that there is no code. And I said the Pioneer/paycheck thing. I also said "code", knowing that there is no true code. There is another way and I said that..and you just confirmed it too. My point was the only people that know how to bypass it work for Pioneer, and I am willing to bet only a handful there are privey to that info. I appreciate you dispelling the myth though. Maybe now people will realize that you are not going to get around it, hearing it from someone that works for the company.

Dick_gazinya

Member - Posts: 1

Joined: April 26, 2005

Location: United States

Posted: April 27, 2005 at 9:33 AM / IP Logged

creeval wrote:

I am sure most here understand that now due to NOTHING being available on the internet except the loop back to the camera in which pretty much is pointless if you have a destination mapped out

well...since my post was deleted?? There is No AVIC-N2 Code! -- posted image. I will say it again...why is it pointless???

The loop back to the camera does work, I have the n2 in my vehicle and am able to watch video while driving....

creeval

Member - Posts: 2

Joined: April 26, 2005

Location: United States

Posted: April 27, 2005 at 9:42 AM / IP Logged

Its pointless because if you dont have a relay to make it think its in reverse and you have a destination input than it has your turns taking up part of the screen and when the turn comes it puts it over your video...If you do have the relay you can't control the video functions through the touch screen moving...Like I said my main concern was not being able to re-route myself without having to pull over on a highway. I wish someone had a way to do this so my passanger can update destinations but so far I have yet to hear anything on this.

Pcollier

Member - Posts: 1

Joined: April 27, 2005

Location: United States

Posted: April 27, 2005 at 4:14 PM / IP Logged

I thought someone had wrote that if you have the voice module then you will be able to change the navigation on the fly. Is this true?

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: April 27, 2005 at 8:55 PM / IP Logged

I was under the same impression when It came to the voice control. The way I understand it is that you can change on the fly using the voice control system.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

There is No AVIC-N2 Code!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.